Download the design files – Nokia joined hands with Microsoft to produce windows smart phones with its first generation Lumia series and it hit the market in November 2011. Since then Nokia’s market share has been raising but not as expected.
Parts and assemblies are shown in the preview window by default. However for drawings you need to change the default setting in the config.pro file. You can do this using the options inside ProE/ Creo or by directly editing the config.pro file.
In the video, see what happens when you on/off the spin center. Here is the best option. If you want to see the whole part or assembly, switch on the spin center. If you want to see a specific feature in part or a specific component in an assembly, switch off the spin center.
Instead of making sketches every time in the sketcher mode, we can save and retrieve the sketches that is often used. We have options to reuse an already saved sketch (.sec) or a drawing (.drw). Lets see one by one.
click on the standard then ISO/DIN press middle button and click Tol table and retrieve. You will see a tolerance directory window. Select all .ttl files and press open. Press ok when asked for regeneration. Click done/return for all and come out of tol setup.
There are two ways to get symbols inside notes. I take the text type “Symbol” to explain this topic since it is available in ProE by default. You can try other fonts too but it will cost you some more time.
Projection views are always aligned in ProE/ Creo drawing. That means you can not move a projection view away from the projection lines however you can move the view along the projection lines back and forth or up and down depending upon the projection.
This video shows how to change the orientation of a diameter dimension. To get a perfect horizontal or vertical, a snap may be used.
You can also do this using the drawing properties. Open the drawing properties and just check the “show as linear dimension” in and click ok. (See image on left side).